Stimuius Menu - HP 8753E User Manual

Stimulus Menu
The (Menu) key provides access to the stimulus menu, which consists of softkeys that activate
stimulus functions or provide access to additional menus. These softkeys are used to define and
control all stimulus functions other than start, stop, center, and span. The following softkeys
are located within the stimulus menu:
n
n ~~~~;~~~~,,itUowsyou to specify the sweep time.
:
n ~~~~~~~~; proHdes access to the trigger
. . . . . . . .._ . ...............................................................
n
n ~~~~~~~~ allows you to cauSe ahe -ent measurement to abofi md a new
measurement to begin. With two-port error-correction activated, pressing this softkey causes
all four S-parameters to be remeasured.
Application and Operation Consspts
6-13