Dp To Dtmf Signal Conversion - Panasonic Section 700 Operation

Section 700 - Operation
(All Versions)
Description
The DBS allows both dial pulse and DTMF extension types.
Related Programming
FF2 (Trunk): DTMF/Pulse Dialing for Trunks
l
Considerations
DP to DTMF Signal Conversion allows DTMF extensions to use either
l
dial pulse or DTMF trunks.

DP to DTMF Signal Conversion

(All Versions)
Description
This feature allows an extension user to switch from DP to DTMF signaling
when using a DP trunk.
For instance, if a user dials into a voice mail system using a DP trunk, the user
can switch to DTMF signaling to communicate with the voice mail system.
DTMF tones can be sent either during the call or while the call is being
dialed.
Operation
To switch from dial pulse to DTMF dialing, press "*" or 'W."
Related Programming
FF2 (Trunk): DTMF/Puise Dialing for 'Trunks
l
Considerations
DTMF dialing remains in effect for the duration of the call. Pulse dialing is
l
restored when the handset is replaced.
Chapter 2. System Features