Removing A 1.8-Inch Hard Drive From A Hard Drive Carrier - Dell PowerEdge E31S Series Owner's Manual

Figure 95. Installing a 1.8-inch hard drive blank
1. hard drive blank
Related references
Safety instructions on page 66
Related tasks
Removing the optional front bezel
Installing the optional front bezel

Removing a 1.8-inch hard drive from a hard drive carrier

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Remove the hard drive carrier from the system.
Steps
1. Turn the hard drive carrier.
2. Pull the rails of the hard drive carrier and lift the hard drive out of the hard drive carrier.
Figure 96. Removing a 1.8-inch hard drive into a hard drive carrier
a. hard drive carrier
b. hard drive
Related references
Safety instructions on page 66
158 Installing and removing system components
on page 68
on page 69