Removing A Power Supply Unit Blank; Installing A Power Supply Unit Blank - Dell X95FF Installation And Service Manual

You can configure the hot spare feature by using the iDRAC settings. For more information, see the iDRAC User's Guide
available at www.dell.com/poweredgemanuals.

Removing a power supply unit blank

Prerequisites
Follow the safety guidelines listed in the
Steps
Pull the blank out of the system.
CAUTION: To ensure proper system cooling, the PSU blank must be installed in the second PSU bay in a
non-redundant configuration. Remove the PSU blank only if you are installing a second PSU.
Figure 94. Removing a power supply unit blank
Next steps
Replace the PSU or PSU

Installing a power supply unit blank

Prerequisites
1. Follow the safety guidelines listed in the
NOTE: Install the power supply unit (PSU) blank only in the second PSU bay.
2. Remove the PSU.
Steps
Align the PSU blank with the PSU bay and push it into the PSU bay until it clicks into place.
Safety instructions.
blank.
Safety instructions.
Installing and removing system components 91