Figure 69. Removing a power supply unit blank
Next steps
Replace the
PSU
or
PSU
Installing a power supply unit blank
Prerequisites
1. Follow the safety guidelines listed in the
NOTE:
Install the power supply unit (PSU) blank only in the second PSU bay.
2.
Remove the
PSU.
Steps
Align the PSU blank with the PSU bay and push it into the PSU bay until it clicks into place.
Figure 70. Installing a power supply unit blank
Power interposer board
This is a service technician replaceable part only.
Removing the power interposer board
Prerequisites
1. Follow the safety guidelines listed in the
blank.
Safety
Safety
instructions.
instructions.
Installing and removing system components
75