Table of Contents
Advertisement
Steps
If you are installing a second power supply unit, remove the power supply unit blank in the bay by pulling the blank outward.
CAUTION:
Proper system cooling, the power supply unit blank must be installed in the second power supply unit
bay in a non-redundant configuration. Remove the power supply unit blank only if you are installing a second
power supply unit.
Figure 71. Removing a power supply unit blank
Next steps
1.
Install a power supply
2. Follow the procedure listed in
Installing a power supply unit blank
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
Steps
Align the PSU blank with the PSU bay and push it into the PSU bay until it clicks into place.
Figure 72. Installing a power supply unit blank
Next steps
1. Follow the procedure listed in
blank.
After working inside your
Safety
instructions.
Before working on your
After working inside your
system.
system.
system.
Installing and removing system components
99
Advertisement
Table of Contents
