Clutch Cover - Suzuki LT-Z250 Service Manual

3-46 ENGINE

CLUTCH COVER

DISASSEMBLY
Remove the clutch release outer guide 1.
Remove the bearing with the special tool.
& 09921-20240: Bearing remover set
NOTE:
If there is no abnormal noise, the bearing removal is not neces-
sary.
INSPECTION
Rotate the balls by hand to inspect for an abnormal noise and a
smooth rotation. Replace the clutch release ball assembly if
there is anything unusual.
REASSEMBLY
Install the bearing with the special tool.
& 09913-70210: Bearing installer set
NOTE:
The bearing seal must face the clutch cover.
Install the clutch release outer guide 1.