Cooling Fan Cover; Clutch Cover; Intake Pipe; Oil Pump Gear - Suzuki UG110 2021 Service Manual

3-46 ENGINE

COOLING FAN COVER

• Install the cooling fan cover.
• Pass the generator lead wire 1 through the slot of the cooling
fan cover.
• Clamp the generator lead wire.

CLUTCH COVER

• Install the dowel pins 1 and new gasket 2.
• Install the clutch cover.
NOTE:
Install the wire clamp with the bolt A .

INTAKE PIPE

• Install the clamps as shown.
NOTE:
Be sure to use the twist-off bolts 1 .

OIL PUMP GEAR

• Apply SUZUKI SUPER GREASE "A" onto the oil pump gear,
and then install it.
$ 99000-25010: SUZUKI SUPER GREASE "A"