Suzuki LT-Z250 Service Manual page 214

7-52 CHASSIS
Install the brake drum.
$
Do not apply grease to the spline portion of brake
drum.
NOTE:
Before installing the brake drum, make sure that the brake drum
is clean and free of any greasey matter.
Install the drum cover and tighten the bolts.
NOTE:
When installing the drum cover, make sure that the O-ring must
be fitted into the groove on the brake panel securely.
NOTE:
Before connecting the brake cables, make sure that the
small-pitch portion of the cable spring faces to the cable adjuster
nut.
Connect the brake cables 0.
Install the right rear wheel hub. (!7-14)
Install the right rear wheel. (!7-15)
After installing the rear brake, adjust the following items.
* Brake pedal play ..... !2-14
* Brake lever play ...... !2-15