Generator Cover; Clutch Cover; Gearshift Cover - Suzuki DL1000 Service Manual

GENERATOR COVER

REPLACEMENT
When replacing the generator stator or crankshaft position sen-
sor, apply THREAD LOCK "1342" to the generator stator set
bolts.
% 99000-32050: THREAD LOCK ''1342''

CLUTCH COVER

OIL SEPARATER
• Remove the oil separater 1.

GEARSHIFT COVER

OIL SEAL INSPECTION
Inspect the gearshift shaft oil seal for damage or wear on the lip.
If any defects are found, replace the oil seal with a new one.
OIL SEAL REPLACEMENT
• Remove the gearshift shaft oil seal.
.
#
The removed oil seal must be replaced with a new one.
• Install the new oil seal with the special tool.
" 09913-70210: Bearing installer set
NOTE:
Apply grease to the oil seal lip to prevent damage when install-
ing the gearshift cover.
' 99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
ENGINE 3-77