Engine Installation - Suzuki LT-Z250 Service Manual

3-8 ENGINE

ENGINE INSTALLATION

Remount the engine in the reverse order of engine removal.
Pay attention to the following points:
NOTE:
* The engine mounting nuts are self-locking.
* Once the nut has been removed, it is no longer of any use. Be
sure to use new nuts, and then tighten them to the specified
torque.
(
ITEM N•m kgf-m
)
23 2.3
*+,
66 6.6
CLUTCH RELEASE ADJUSTMENT
Temporarily install the gear shift lever.
Remove the clutch adjuster cap.
Loosen the clutch release outer guide nuts 1.
Loosen the locknut 2.
Turn the adjusting screw 3 clockwise until it stops.
lb-ft
16.5
48.0