Suzuki LT-Z250 Service Manual page 212

7-50 CHASSIS
Apply SUZUKI SUPER GREASE to new O-rings and brake
camshaft.
Install the O-rings and brake camshaft to the anchor panel.
& 99000-25030: SUZUKI SUPER GREASE A (USA)
99000-25010: SUZUKI SUPER GREASE A (Others)
$
O-rings should be replaced with new ones.
Install the washer 4.
Install the spring 5 with the spring end hocked to the hole on
the brake panel.
Align the protrusion A of the brake lining indicator prate 6
with the groove B of the brake camshaft.
Install the brake lining indicator prate 6.
Install the brake cam lever 7 as its punched mark C aligns
with the slit D on the brake camshaft.
Tighten the cam lever nut to the specified torque.
" Cam lever nut: 11 N•m (1.1 kgf-m, 8.0 lb-ft)
Install new O-ring 8 onto the rear brake panel.
$
O-ring must be replaced with a new one.