Suzuki LT-Z250 Service Manual page 53

Install the reverse gearshift arm.
% Reverse gearshift arm angle B: 20
Install the gearshift lever.
% Gearshift arm angle C: 35
Adjust the gearshift lever height D.
% Gearshift lever height D D D D : 0 10 mm (0 0 .4 in)
Position the carburetor clamps as shown in the illustration.
After installing the engine, route the wire harness, cables and
hoses properly. (!9-11 to -14)
Check the followings.
* Engine oil !2-10
* Engine idle speed !2-9
* Throttle cable play !2-9
ENGINE
Left Right Left
45ß
Engine side
Air cleaner side
3-11
Right