Suzuki LT-Z250 Service Manual page 190

7-28 CHASSIS
Align the master cylinder holder s mating surface 1 with the
punched mark 2 on the handlebars and tighten the upper
clamp bolt first.
" Master cylinder clamp bolt: 10 N•m (1.0 kgf-m, 7.0 lb-ft)
A Master cylinder
B Master cylinder upper clamp bolt
C Handlebar
D Clearance
Tighten the brake hose union bolt 3 to the specified torque.
" Brake hose union bolt: 23 N•m (2.3 kgf-m, 16.5 lb-ft)
NOTE:
After the brake hose union touching to the stopper, tighten the
union bolt.
$
Bleed air from the brake system after reassembling
the master cylinder. (!2-16)