Suzuki LT-Z250 Service Manual page 133

FINAL GEAR CASE COVER/GEAR CASE
[FINAL ASSEMBLY]
Coat new O-ring with SUZUKI SUPER GREASE and apply
SUZUKI BOND to the mating surface of the cover, then install
the gear case cover.
$ 99000-25030: SUZUKI SUPER GREASE A ( USA)
99000-25010: SUZUKI SUPER GREASE A ( Others)
' 99104-31140: SUZUKI BOND 1207B (USA)
( 99000-31110: SUZUKI BOND 1215 (Others)
NOTE:
After the backlash and tooth contact have been checked or
adjusted (!4-18), install new O-ring and apply SUZUKI
BOND.
Apply THREAD LOCK SUPER to the case cover bolts and
tighten them to the specified torque in a crisscross pattern.
) 99000-32030: THREAD LOCK SUPER 1303
% Gear case cover bolt: 26 N•m (2.6 kgf-m, 19.0 lb-ft)
NOTE:
After the backlash and tooth contact have been checked or
adjusted, apply THREAD LOCK SUPER to the case cover bolts.
UNIVERSAL JOINT
Apply SUZUKI SUPER GREASE to the bearing and its dust
seal lip.
$ 99000-25030: SUZUKI SUPER GREASE A ( USA)
99000-25010: SUZUKI SUPER GREASE A ( Others)
Install the universal joint and bearings with the special tool.
" 09913-70210: Bearing installer set
DRIVE TRAIN 4-15