Suzuki LT-Z250 Service Manual page 83

Apply THREAD LOCK SUPER to the bolts, and then tighten
them to the specified torque with a offset wrench.
" Starter clutch bolt: 26 N•m (2.6 kgf-m, 19.0 lb-ft)
* 99000-32030: THREAD LOCK SUPER 1303
& 09930-44520: Rotor holder
Install the starter driven gear to the starter clutch.
Check that the starter driven gear turns only in counter clock-
wise.
If there is anything unusual, replace the one way clutch.
Check the starter driven gear bearing. If there is anything
unusual, replace the bearing.
Remove the bearing with the special tool.
& 09913-70210: Bearing installer set
Install the bearing with the special tool.
& 09913-70210: Bearing installer set
ENGINE 3-41