Suzuki LT-Z250 Service Manual page 56

3-14 ENGINE
Remove the C-ring 5.
'
Do not drop the C-ring 5 into the crankcase.
CYLINDER HEAD
Remove the cylinder head nuts (M6) 1.
Loosen the cylinder base nuts (M6) 2.
Remove the cylinder head nuts (M8) diagonally.
Remove the cylinder head.
NOTE:
If the cylinder head does not come off, lightly tap on the finless
portion of it with a plastic hammer.
CYLINDER
Remove the dowel pins, cylinder head gasket and cam chain
guide 1.
Remove the cylinder base nuts (M6).
Remove the cylinder.
NOTE:
* Be careful not to drop the dowel pins into the crankcase.
* If the cylinder does not come off, lightly tap on the finless por-
tion of it with a plastic hammer.
PISTON
Remove the piston pin circlip 1.
Remove the piston pin and piston.
NOTE:
Place a rag under the piston so as not to drop the piston pin cir-
clip into the crankcase.
Remove the cylinder gasket and dowel pins.