Battery; Specifications; Initial Charging - Suzuki LT-Z250 Service Manual

BATTERY

SPECIFICATIONS

Type designation
Capacity
a Anode plates
b Separator (fiberglass plate)
c Cathode plates
d Upper cover breather

INITIAL CHARGING

FILLING ELECTROLYTE
Remove the aluminum tape 1 sealing the battery electrolyte
filler holes 2.
Remove the caps 3.
NOTE:
* After filling the electrolyte completely, use the removed caps
3 as the sealing caps of the battery electrolyte filler holes.
* Do not remove or pierce the sealed portions 4 of the electro-
lyte container.
Insert the nozzles of the electrolyte container 5 into the bat-
tery electrolyte filler holes, holding the container firmly so that
it does not fall. Take a precaution not to allow any of the fluid
to spill.
YTX9-BS
12 V, 28.8 kC (8 Ah)/10 HR
e Stopper
f Filter
g Terminal
h Safety valve
ELECTRICAL SYSTEM 8-27