Remounting - Suzuki LT-Z250 Service Manual

REMOUNTING

Remount the carburetor assembly in the reverse order of
removal. Pay attention to the following points:
Fit the lug on the carburetor with the intake pipe s projection.
Position the carburetor clamps as shown in the illustration.
Connect the carburetor hoses properly. (!9-16)
After the carburetor assembly has been remounted onto the
engine, perform the following adjustments:
* Throttle cable play......................................... !2-9
* Engine idle speed ......................................... !2-9
FUEL SYSTEM
Left
Right Left
45ß
Engine side Air cleaner side
5-15
Right