Remounting - Suzuki LT-Z250 Service Manual

REMOUNTING

Remount the rear swingarm and suspension in the reverse order
of removal. Pay attention to the following points:
Apply THREAD LOCK SUPER to the swingarm pivot bolts.
Install the swingarm pivot bolts and upper and lower shock
absorber mounting bolts temporarily.
Tighten the swingarm pivot nut to the specified torque.
, 99000-32030: THREAD LOCK SUPER 1303 (USA)
- 99000-32110: THREAD LOCK SUPER 1322 (Others)
" Swingarm pivot nut: 85 N•m (8.5 kgf-m, 61.5 lb-ft)
Tighten the upper and lower shock absorber mounting nuts to
the specified torque of each.
" Rear shock absorber mounting nut (Upper):
Rear shock absorber mounting nut (Lower):
78 N•m (7.8 kgf-m, 55 lb-ft)
60 N•m (6.0 kgf-m, 43.0 lb-ft)
CHASSIS 7-59