Generator Cover; Clutch Cover - Suzuki DR-Z70 Service Manual

3-47 ENGINE

GENERATOR COVER

DISASSEMBLY
• Remove the generator lead wire clamp 1 , stator coil 2 ,
pick-up coil 3 and grommet 4 .
REASSEMBLY
Reassemble the generator cover in the reverse order of disas-
sembly. Pay attention to the following points:
• Tighten the generator stator bolts 1 , pick-up coil set bolts 2
and generator lead wire clamp bolt 3 to the specified torque.
Generator stator bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
Pick-up coil set bolt: 4.5 N·m (0.45 kgf-m, 3.5 lb-ft)
Generator lead wire clamp bolt:
NOTE:
Be sure to install the grommet 4 to the generator cover.

CLUTCH COVER

DISASSEMBLY
• Remove the lock-nut 1 and spacer 2 .
• Remove the release arm 3 .
• Remove the O-ring 4 .
10 N·m (1.0 kgf-m, 7.0 lb-ft)