Setting Up - Christie LW502 User Manual

Setting up

Setting up
Install the projector according to the
environment and manner the projector is used
in.
For the case of installation in a special state
such as ceiling mount, the specifi ed mounting
accessories and service may be required.
Before installing the projector, consult your
dealer about your installation.
Secure a clearance of 50cm or greater between the exhaust vents and walls, and
a clearance of 30cm or greater between the intake vents and walls. Assume that
there is enough clearance in the front, back, and top of the projector in the fi gure
below.
50cm or greater
Secure a clearance of 30cm or greater between the intake vents and walls.
Assume that there is enough clearance in the front, sides, and top of the projector
in the fi gure below.
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
Exhaust
vents
30cm or greater
Intake
vents
30cm or greater
Intake
vents
8