Easy Menu - Christie LW502 User Manual

EASY MENU

EASY MENU
Select an item from the EASY menu using the ▲/▼
cursor buttons. Then perform it according to the
following table.
Item
ASPECT
KEYSTONE
3D KEYSTONE
PICTURE MODE
(continued on next page)
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
Using the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in SIZE AND POSITION menu (60).
Pressing the ► button displays the KEYSTONE dialog.
See the KEYSTONE item in SETUP menu (68).
Pressing the ► button displays the 3D KEYSTONE dialog.
See the 3D KEYSTONE item in SETUP menu (68).
Using the ◄/► buttons switches the picture mode.
The picture modes are combinations of GAMMA and COLOR TEMP
settings. Choose a suitable mode according to the projected source.
STANDARD ó NATURAL ó CINEMA ó DYNAMIC

USER-3

USER-2

USER-1 ó DICOM SIM. ó DAYTIME ó WHITEBOARD
• Lines or other noise might appear on the screen when this function
is operated, but it is not a malfunction.
• DICOM SIM. is the projector's DICOM
Communication in Medicine") simulation mode. This mode
simulates the DICOM standard, which is a standard applicable to
digital communications in medicine, and can be useful for displaying
medical images, such as X-rays photos. This projector is not a
medical device and is not compliant to the DICOM standard, and
neither the projector nor the DICOM SIM. mode should be used for
medical diagnosis.
Description
("Digital Imaging and
®

BOARD(BLACK)

BOARD(GREEN)

54