Christie LW502 User Manual page 67

Item
DIGITAL RANGE
COMPUTER IN
FRAME LOCK
(continued on next page)
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
The digital range of HDMI
signals from the HDMI 1, HDMI 2
TM
and HDBaseT ports can be set.
(1) Use the ▲/▼ buttons to select the port to be set.
(2) Use the ◄/►buttons to select the digital range.
AUTO ó NORMAL ó ENHANCED
AUTO: automatically sets the optimum mode.
NORMAL: sets the suitable mode for DVD signals. (16-235)
ENHANCED: sets the suitable mode for computer signals. (0-255)
• If the contrast of the screen image is too strong or weak, try finding
a more suitable mode.
The computer input signal type for COMPUTER IN port can be set.
Use the ◄/► buttons to select the
computer input signal type.
AUTO ó SYNC ON G OFF
• Selecting the AUTO mode, you can
input a sync on G signal or component video signal from the port.
• In the AUTO mode, the picture may be distorted with certain input
signals. If this occurs, remove the signal connector so that no signal
is received and select the SYNC ON G OFF, and then reconnect the
signal.
Set the frame lock function on/off for each port.
(1) Use the ▲/▼ buttons to select the input ports.
(2) Use the ◄/► buttons to turn the frame lock function on/off .
ON ó OFF
• This item can be performed only on a signal with a vertical
frequency of 59 to 61 Hz.
• When ON is selected, moving pictures are displayed more
smoothly.
Description
TM
input
INPUT menu
65