Page 1
Ins t allat ion an d Set up M a n u al 020-102490-02 Optional Lenses D Series and LW551i...
Page 2
The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
• TIP HAZARD! Do not install a lens without securely mounting the projector first. Optional Lenses D Series and LW551i Installation and Setup Manual 020-102490-02 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
• Remove the lens cap before turning the product on to avoid damaging the lens. • Only use cleaning solutions recommended by Christie. All other cleaning solutions may cause product damage and will void the warranty. • Do not reuse lens tissues.
Installing lenses for D Series projectors Learn how to install and remove lenses for the D Series projectors. These procedures apply to the LX801i, LW651i, LW751i, LWU601i, and LWU701i projectors. Installing the lens Only use lenses designed for the projector model.
Page 7
4. Re-install the upper and lower front covers. Front cover (upper part) Front cover (lower part) Optional Lenses D Series and LW551i Installation and Setup Manual 020-102490-02 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
Remove the lens from the projector. To avoid any malfunctions, ensure the surface of the lens does not come in contact with the projector. Optional Lenses D Series and LW551i Installation and Setup Manual 020-102490-02 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc.
Page 9
You can move the lever while the upper plate touches the lower plate. 6. Insert a dust protector to prevent any substances getting into the lens installation area. Optional Lenses D Series and LW551i Installation and Setup Manual 020-102490-02 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc.
5. To prevent the lens from falling off, after attaching the lens, check that it is securely mounted and that the lens does not move. 6. Re-install the front cover. Optional Lenses D Series and LW551i Installation and Setup Manual 020-102490-02 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc.
Remove the lens from the projector. To avoid any malfunctions, ensure the surface of the lens does not come in contact with the projector. Optional Lenses D Series and LW551i Installation and Setup Manual 020-102490-02 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc.
Page 12
Installing lenses for the LW551i projector Lens lock lever You can move the lever while the upper plate touches the lower plate. Optional Lenses D Series and LW551i Installation and Setup Manual 020-102490-02 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
Learn how to install and remove the ultra short throw fixed lens and how to install the support brackets for the lens. This lens can only be used on the D Series projectors. Installing the lens Install the ultra short throw fixed lens in the projector.
Page 14
For installation on the ceiling, move the tilt correction lever in the direction of (-). 5. Install the lens: a) Remove the protection sheet pasted to the projection window and the lens cap. Optional Lenses D Series and LW551i Installation and Setup Manual 020-102490-02 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc.
Page 15
To prevent the lens from falling off, after attaching the lens, check that it is securely mounted and that the lens does not move. 6. Re-install the upper and lower front covers. Optional Lenses D Series and LW551i Installation and Setup Manual 020-102490-02 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc.
Press LENS SHIFT. b) To access the CENTERING feature, from the LENS SHIFT dialog, press INPUT. c) To center the lens, press the Right arrow. Optional Lenses D Series and LW551i Installation and Setup Manual 020-102490-02 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc.
Page 17
6. Attach the lens cap to the lens. 7. Remove the optical filter: a) Using a pair of tweezers, grasp the part sticking out at the bottom of the optical filter. Optional Lenses D Series and LW551i Installation and Setup Manual 020-102490-02 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc.
• To protect itself, the projector has a temperature sensor that turns off the power if its internal temperature rises abnormally. Christie recommends the following to prevent the temperature rising abnormally: •...
Page 20
9. Using the hex key, loosen the screw until it stops. Screw 10. Attach the support bracket to the lens mount bracket. Optional Lenses D Series and LW551i Installation and Setup Manual 020-102490-02 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
Page 21
Support bracket The following images shows the side view of the engaged section: Lens mount bracket Optional Lenses D Series and LW551i Installation and Setup Manual 020-102490-02 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
Learn how to mount the projector with an ultra short throw fixed lens on a ceiling. 1. To mount the bracket of the ceiling mount to the projector and the mount bracket A, use the four M6×35 hex-head screws. Optional Lenses D Series and LW551i Installation and Setup Manual 020-102490-02 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc.
Page 23
4. When the screen is in position, firmly tighten the screw until it is locked in place. Optional Lenses D Series and LW551i Installation and Setup Manual 020-102490-02 Rev. 1 (04-2017) Copyright 2017 Christie Digital Systems USA Inc.