Christie LW502 User Manual page 95

Item
SERVICE
(continued)
(continued on next page)
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
WIRED NETWORK
Selects whether to use LAN or HDBaseT port.
can be used for the connection to the network.
Switch it according to the environment.
CONTROL
RS-232C
TERMINAL
Selects whether to use CONTROL or HDBaseT
port.
NOTE
port can be used for the RS-232C connection.
Switch it according to the environment.
Selects the device to refer to the resolution
information of HDMI output.
・When EXTERNAL DEVICE is selected, the
resolution of the signal input to the projector and
HDMI OUT
signal output from the projector may be restricted
RESOLUTION
by the maximum resolution of the connected
device such as projector or monitor.
・When PROJECTOR is selected, the image from
the device connected to HDMI OUT may not be
displayed normally.
Description
LAN ó HDBaseT
NOTE • Only the LAN or HDBaseT port
CONTROL ó HDBaseT
• Only either CONTROL or HDBaseT
EXTERNAL DEVICE ⇔ PROJECTOR
OPTION menu
93