Christie LW502 User Manual page 74

SETUP menu
Item
STANDBY MODE
COLOR
UNIFORMITY
(continued on next page)
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
Using ▲/▼ buttons switches the standby mode setting between
NORMAL and POWER SAVE.
NORMAL ó POWER SAVE
• When POWER SAVE is selected, the RS-232C communication
control except to turn the projector on and the network function
are disabled while the projector is in the standby mode. If the
COMMUNICATION TYPE in the COMMUNICATION menu is set to
NETWORK BRIDGE, all of the RS-232C commands are disabled
(90).
• When POWER SAVE is selected, STANDBY OUTPUT is invalid.
• When POWER SAVE is selected, the HDMI Link and HDBaseT™
functions are disabled while the projector is in the standby mode.
• This function is available only when OFF is selected for STACK
MODE. (OPTION menu > SERVICE > COMMUNICATION >
STACK).
• When POWER SAVE is selected, SCHEDULE function (Ex.
POWER-ON) at STANDBY MODE is not operated.
Selects image level and region that must be required to correct to be
corrected, and adjusts Color Balance.
Divides the screen into nine regions and adjusts gain of R/G/B of
each region.
Description
72