Christie LW502 User Manual page 75

Item
OSD MESSAGE
(continued on next page)
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
Using the ▲/▼ buttons turns on/off the message function.
ON ó OFF ó HIDE
■OFF : The following message functions do not work.
"AUTO IN PROGRESS" while automatically adjusting.
"NO INPUT IS DETECTED"
"SYNC IS OUT OF RANGE"
"INVALID SCAN FREQ."
"NOT AVAILABLE"
"Searching...." while searching for the input.
"Detecting...." while an input signal is detected.
The indication of the input signal displayed by changing.
The indication of the aspect ratio displayed by changing.
The indication of the PICTURE MODE displayed by changing.
The indication of the DYNAMIC IRIS displayed by changing.
The indication of the MY MEMORY displayed by changing.
The indication of "FREEZE" and "II" while freezing the screen by
pressing the FREEZE button.
The indication of the TEMPLATE displayed by changing.
The indication of the ECO MODE displayed by changing.
■HIDE : All message functions do not work.
The following buttons function:
STANDBY, ON
• To change this function, follow the steps below.
1. Press the OSD MSG button on the remote control for three seconds.
2. The HIDE OSD is displayed.
While this OSD is displayed, press the OSD MSG button again
on the remote control.
3. Toggle and change the function.
ON ó OFF ó HIDE
Description
SETUP menu
73