Input Menu - Christie LW502 User Manual

INPUT menu

Select an item from the Input menu using the ▲/▼
cursor buttons, and press the ► cursor button or
ENTER button to execute the item. Then perform it
according to the following table.
Item
PROGRESSIVE
VIDEO NR
COLOR SPACE
(continued on next page)
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
Using the ▲/▼ buttons switches the progress mode.
TV ó FILM ó OFF
• This function works only for a video signal, component video signal
(of 480i@60 or 1080i@60), an HDMI
TM
and HDBaseT signal (of 480i@60 or 1080i@60).
• When TV or FILM is selected, the screen image is sharp. FILM
adapts to the 2-3 Pull-Down conversion system. But these may
cause a certain defect (for example, jagged line) of the picture for
a quick moving object. If this occurs, select OFF, even if the screen
image loses sharpness.
Using the ▲/▼ buttons switches the noise reduction mode.
HIGH ó MID ó LOW
• This function works only for a video signal, component video signal
(of 480i@60 or 1080i@60), an HDMI
TM
and HDBaseT signal (of 480i@60 or 1080i@60).
Using the ▲/▼ buttons switches the mode for color space.
AUTO ó RGB ó SMPTE240 ó REC709 ó REC601
• This item can be selected only for a computer signal (except for
signals from the LAN port).
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work correctly at some signals.
If this occurs, select a suitable mode except AUTO.
Description
TM
signal (of 480i@60 or 1080i@60),
TM
signal (of 480i@60 or 1080i@60),
INPUT menu
63