Christie LW502 User Manual page 71

Item
GEOMETRY
CORRECTION
(continued)
LAMP & FILTER
(continued on next page)
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
TEST PATTERNS
Select PATTERN with ▲/▼ buttons.
Displayed pattern [Off/1/2/3/4/5/6] can be switched with ◄/► buttons.
PATTERN 1: Frame
PATTERN 2: Red Grid
PATTERN 3: Green Grid
PATTERN 4: Blue Grid
PATTERN 5: Vertical 9 steps
PATTERN 6: Horizontal 9 steps
OFF: Displays the input signal.
Selecting this item displays the LAMP
& FILTER menu.
Select an item using the ▲/▼ buttons,
and press the ► button or the ENTER
button on the remote control to
execute the item.
ECO MODE
Using the ▲/▼ buttons switches the Eco mode.
NORMAL ó ECO
• When the item other than NORMAL is selected, acoustic noise and
screen brightness are reduced.
LAMP HOURS
The lamp hours is the usage time of the lamp, counted after the last
resetting. It is shown in the LAMP & FILTER menu.
Pressing the RESET button on the remote control or the ► button
of the projector displays a dialog.
To reset the lamp hours, select the OK using the ► button.
CANCEL ð OK
• For the lamp replacement, see the section Replacing the lamp
103
( ).
• The HDCR LiteLoc function does not work properly unless LAMP
HOURS is initialized when replacing a lamp.
Description
SETUP menu
69