Setup Menu - Christie LW502 User Manual

SETUP menu

SETUP menu
Select an item from the Setup menu using the ▲/▼
cursor buttons, and press the ► cursor button or
ENTER button to execute the item. Then perform it
according to the following table.
Item
GEOMETRY
CORRECTION
(continued on next page)
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
KEYSTONE
Selecting this item displays the KEYSTONE dialog.
For details, see KEYSTONE in Correcting the distortion(
• When the zoom adjustment is set to the TELE (telephoto focus),
this function may be excessive. This function should be used when
the zoom adjustment is set to the full WIDE (wide-angle focus).
• When the horizontal lens shift is not set to the center, this function
may not work correctly.
• This function is unavailable when the screen is activated by
3D KEYSTONE (
3D KEYSTONE
Selecting this item displays the 3D KEYSTONE dialog. For details,
see 3D KEYSTONE in Correcting the distortion (
• This function is unavailable when the screen is activated by
38
KEYSTONE ( ), and WARPING (
WARPING
Selecting this item displays the WARPING dialog. For details, see
Application Manual of this feature.
• This function is unavailable when the screen is activated by
38
KEYSTONE ( ) and 3D KEYSTONE (
EDGE BLENDING
Selecting this item displays the EDGE BLENDING dialog. For
details, see EDGE BLENDING feature (
Description
39
), and WARPING (
40
).
39
).
40
).
39
).
41 ~ 44
).
38
).
68