Christie LW502 User Manual page 86

OPTION menu
Item
MY BUTTON
(continued on next page)
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
This item is to assign one of the following functions to MY BUTTON
(1 to 2) on the remote control (7).
(1) Use the ▲/▼ buttons on the MY BUTTON menu to select a
button from MY BUTTON - 1 to 4 and press the ► or ENTER
button to display the MY BUTTON setup dialog.
(2) Then using the ▲/▼/◄/► buttons sets one of the following
functions to the chosen button. Press the ENTER or
save the setting.
MY IMAGE: Displays the MY IMAGE menu.(5. My Image
Function in the Network Guide)
MESSENGER: Turns the messenger text displayed on the screen
on/off (6. Messenger Function in the Network Guide).
When there is no transferred text data to display, the message
"NO MESSENGER DATA" appears.
SHUTTER: Turns the lens shutter closed and opened.
PbyP / PIP SWAP: Swaps the picture on the right with one on
the left in the PbyP mode. Swaps the primary picture and the
secondary picture in the PIP mode. (50)
PIP POSITION: Toggles the PIP position.
eClarity: Turns on/off the eClarity dialog (59).
HDCR: Turns on/off the HDCR dialog (59).
INFORMATION: Displays SYSTEM INFORMATION →
INPUT INFORMATION (94) → NETWORK INFORMATION.
MY MEMORY: Loads one of adjustment data stored (59).
When more than one data are saved, the adjustment
changes every time the MY BUTTON is pressed.
When no data is saved in memory, the
dialog "No saved data" appears.
When the current adjustment is not
saved to memory, the dialog as shown in
the right appears.
To keep the current adjustment, press the ► button to exit.
Otherwise loading a data overwrites the current adjusted condition.
DYNAMIC IRIS: Changes the dynamic iris mode (57).
PICTURE MODE: Changes the PICTURE MODE (57).
FILTER RESET: Displays the filter hours reset confirmation dialogue
(70).
TEMPLATE: Makes the template pattern selected to the TEMPLATE
item (80) appear or disappear.
RESOLUTION: Turns on/off the RESOLUTION dialog (66).
ECO MODE: Changes the ECO MODE dialog (69).
Description
button to
84