Christie LW502 User Manual page 82

MENU PREFERENCES
Item
SOURCE NAME
(continued)
TEMPLATE
(continued on next page)
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
(6) The current name is displayed on the first
line. Use the ▲/▼/◄/► buttons and the
ENTER or button to select and enter
characters. To erase one character at a
time, press the RESET button or press
the ◄ and button simultaneously.
Also if you move the cursor to DELETE
or CLEAR ALL on screen and press
the ENTER or
characters are erased. The name can be
a maximum of 16 characters.
(7) To change an already inserted character,
press the ▲ button to move the cursor to
the first line, and use the ◄/► buttons to
move the cursor on the character to be
changed.
After pressing the ENTER or
the character is selected. Then, follow the same procedure as
described at the item (6) above.
(8) To finish entering text, move the cursor to the OK on screen
and press the ►, ENTER or
name without saving changes, move the cursor to the CANCEL
on screen and press the ◄, ENTER or
Using the ▲/▼ cursor buttons switches the mode for the template
screen.
Press the ► cursor (or the ENTER) button to display the selected
template, and press the ◄ cursor button to close the displayed
screen.
The last selected template is displayed when the MY BUTTON
allocated to the TEMPLATE function is pressed (84).
TEST PATTERN ó DOT-LINE1 ó DOT-LINE2 ó DOT-LINE3

STACK ó MAP2 ó MAP1 ó CIRCLE2 ó CIRCLE1 ó DOT-LINE4
You can turn a map upside down and scroll it horizontally when
MAP1 or MAP2 is selected. To invert or scroll the map, display
the guidance by pressing the RESET button on the remote three
seconds or more when MAP1 or MAP2 appears.
Description
button, one or all
button,
button. To revert to the previous
button.

80