Regarding the indicator lamps
Regarding the indicator lamps (continued)
NOTE
• When the interior portion has become overheated, for safety
purposes, the projector is automatically shut down, and the indicator lamps
may also be turned off. In such a case, disconnect the power cord, and wait at
least 45 minutes. After the projector has sufficiently cooled down, confirm the
attachment state of the lamp and lamp cover, and turn the power on again.
For the SECURITY indicator, see SECURITY INDICATOR in the SECURITY
menu (102).
Resetting all settings
When it is difficult to correct wrong settings, the FACTORY RESET function of
SERVICE item in OPTION menu (94) can reset all settings (except settings
such as LANGUAGE, AUTO BLANK, LAMP HOURS, FILTER HOURS, FILTER
MESSAGE, STANDBY MODE, COMMUNICATION, SECURITY and NETWORK)
to the factory default.
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
116