Remote Control; Installing The Batteries - Christie LW502 User Manual

Remote control

Installing the batteries

Insert the batteries into the remote control before using it. If the remote control
starts to malfunction, replace the batteries. If not using the remote control for long
period, remove the batteries from the remote control and store them in a safe
place.
1.
Remove the battery cover.
2.
Align and insert the two AA batteries according to
their plus and minus terminals as indicated in the
remote control. (Use the appropriate AA carbon-zinc
or alkaline batteries (non-rechargeable) according
to laws and regulations. Batteries are not included.)
3.
Put the battery cover back to the former state.
WARNING
directed. Improper use may result in battery explosion, cracking or leakage, which
could result in fire, injury and/or pollution of the surrounding environment.
• Use only the batteries specified. Do not use batteries of different types at the same
time. Do not mix a new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
• Do not place a battery in a fire or water. Keep batteries in a dark, cool and dry place.
• If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
• Obey the local laws on disposing the battery.
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
►Always handle the batteries with care and use them only as
Remote control
27