Christie LW502 User Manual page 18

Setting up
Connecting with your devices (continued)
WARNING
possible burns disconnect the projector power cord for 10 minutes before
touching the adapter.
►When using the USB wireless adapter, use the supplied adapter cover (24).
CAUTION
the consent of the administrator of the network.
►Do not connect the LAN port to any network that might have the excessive voltage.
►The designated USB wireless adapter sold as an option is required to use the
wireless network function of this projector. Before connecting the USB wireless
adapter, turn off the power of the projector and disconnect the power cord. Do not
use any extension cable or device when connecting the adapter to the projector.
►To connect both the LAN cable and USB wireless adapter to the projector, use
a LAN cable that is flat on the side where the plug's wire is visible. Otherwise,
both of them cannot be connected correctly, or the wire may break (malfunction).
(continued on next page)
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
►Heat may build up in the USB wireless adapter, to avoid
► Before connecting the projector to a network system, obtain
16