Using The Automatic Adjustment Feature - Christie LW502 User Manual

Using the automatic adjustment feature

Press AUTO button on the remote control.
Pressing this button performs the following.
 For a computer signal
The vertical position, the horizontal position and the
horizontal phase are automatically adjusted.
Make sure that the application window is set to its
maximum size prior to attempting to use this feature. A dark picture may still be
incorrectly adjusted. Use a bright picture when adjusting.
 For a video signal
The video format best suited for the respective input signal is selected
automatically. This function is available only when the AUTO is selected for
the VIDEO FORMAT item in the INPUT menu (64). The vertical position and
horizontal position are automatically set to the default.
 For a component video signal
The vertical position and horizontal position are automatically set to the default.
The horizontal phase is automatically adjusted.
NOTE
• The automatic adjustment operation requires approximately. 10 seconds.
Also note that it may not function correctly with some input.
• When this function is performed for a video signal, an extra line may appear
outside a picture.
• When this function is performed for a computer signal, a black frame may be
displayed on the edge of the screen, depending on the computer model.
• The items adjusted by this function may vary when the FINE or DISABLE is selected
for the AUTO IMAGE ADJUST item of the SERVICE item in the OPTION menu (88).
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
Operating
MYBUTTON
INPUT
1 2
ASPECT PbyP AUTO FREEZE
AUTO button
MYBUTTON
INPUT 1 2
ASPECT PbyP AUTO FREEZE
MAGNIFY FOCUS ZOOM VOLUME
+ + +
ON
MAGNIFY OFF - - FOCUS - ZOOM VOLUME
+ + +
ON PAGE
UP GEOMETRY PICTURE MUTE
DOWN INTERACTIVE NETWORK BLANK
ESC MENU
ENTER
OSD MSG RESET
-
- -
OFF
PAGE
UP GEOMETRY PICTURE MUTE
INTERACTIVE NETWORK BLANK
DOWN
ESC MENU
ENTER
OSD MSG RESET
37