Operating
PbyP (Picture by Picture) / PIP (Picture in Picture) (continued)
Setting information
The setting information appears for several seconds when the PbyP / PIP
function is started. Displays the input information for each area. A frame around
the main area and an audio mark indicating the audio output are also displayed.
The information can be redisplayed with the ◄/► buttons after it has been
erased.
main area sub area
Input information
PbyP mode
Changing the main area
The position of the main area can be toggled with the ◄/► buttons when the
setting information is displayed on the screen. The frame and the audio mark
move together with it.
main
sub
area
area
PbyP mode
(continued on next page)
LW502/LWU502 User's Manual - Operating Guide
020-001057-01 Rev. 1 (06-2016)
Audio mark
Frame
sub
main
area
area
Audio mark
main area
Input information
PIP mode
main area
sub area
PIP mode
Frame
sub area
sub area
main area
48