Normal Engine Operation; Shut-Down Procedure - JLG G5-18A Operation Manual

Section 4 - Operation

Normal Engine Operation

• Observe instrument panel frequently to be sure all systems are functioning properly.
• Be alert for unusual noises or vibration. When an unusual condition is noticed, park
machine in safe position and perform shut-down procedure. Report condition to your
supervisor or maintenance personnel.
• Avoid prolonged idling. If the engine is not being used, turn it off.

Shut-Down Procedure

When parking the telehandler, park in a safe location on flat level ground and away from
other equipment and/or traffic lanes.
1. Apply the park brake.
2. Shift the transmission to "Neutral. "
3. Lower forks or attachment to the ground.
4. Operate engine at low idle for 3 to 5 minutes. DO NOT over rev engine.
5. Shut off engine and remove ignition key.
6. Exit telehandler properly
7. Turn off electrical master switch (if equipped).
8. Block wheels (if necessary).
4-4 31200743