Carriage With Forks - JLG G5-18A Operation Manual

Section 5 - Attachments and Hitches

Carriage with Forks

OY0690
The joystick (1) controls lift/lower and the extend/retract movement of the boom.
The tilt button (2) enables fork tilt.
• While pressing and holding button move joystick left to tilt up.
• While pressing and holding button move joystick right to tilt down.
Installation Procedure:
• Refer to "Attachment Installation" on page 5-9.
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could damage forks
or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
5-18
Use Carriage Attachment Capacity Chart
To determine maximum capacity, refer to "Telehandler/Attachment/
Fork Capacity" on page 5-4.
1
2
OAL1601
31200743