Operator Maintenance Instructions; Fuel System - JLG G5-18A Operation Manual

Section 7 - Lubrication and Maintenance
7.5

OPERATOR MAINTENANCE INSTRUCTIONS

Fuel System

A. Fuel Level Check
10 KPH
127° F
1127 RPM
1
10 KPH
1. Check fuel gauge (1) located on instrument panel in cab.
2. If fuel is low, proceed to fuel source and perform "Shut-Down Procedure" on page 4-4.
3. Turn fuel tank cap (2) and remove from filler neck.
4. Add diesel fuel as needed.
5. Replace fuel tank cap.
Note: Replenish diesel fuel at end of each work shift to minimize condensation.
EQUIPMENT DAMAGE. Do not allow machine to run out of fuel during operation. See
Engine Operation & Maintenance Manual for details prior to servicing.
7-8
127° F
1127 RPM
NOTICE
10
OW0970
OAH2141
31200743
OW0990
2