Parking Procedure - JLG G5-18A Operation Manual

Park Brake Lever (2505H)
Park brake lever (2) controls the application and release of the park brake. Indicator light
on instrument panel illuminates to indicate brake is applied.
• Pull lever up to engage park brake. With park brake applied, transmission will not
engage forward or reverse.
• Lift detent ring and push lever down to disengage park brake.
MACHINE ROLL-AWAY HAZARD. Always move park brake lever to "ON" position,
lower boom to ground and stop engine before leaving cab.
CRUSH HAZARD. Turning engine off applies the park brake. Applying park brake or
turning engine off while traveling will cause unit to stop abruptly and could cause load
loss. To stop the machine in an emergency, either apply the park brake or turn off
engine.

Parking Procedure

1. Using service brake, stop telehandler in an appropriate parking area.
2. Follow "Shut-Down Procedure" on page 4-4.
31200743
OAL1261
WARNING
WARNING
Section 3 - Controls and Indicators
2
3-5