Operator Seat; Operator Presence (Ce & Aus) - JLG G5-18A Operation Manual

3.4

OPERATOR SEAT

Operator Presence (CE & AUS)
3
The operator seat (1) is equipped with an operator presence switch. If the switch detects a
loss of pressure during operation, after a two second delay one of the following will occur:
1. With the park brake (2) disengaged and the transmission in neutral (3):
• Horn sounds continuously.
• Upon returning to seated position, horn will cease.
2. With the park brake (2) disengaged and transmission in forward or reverse (3):
• Horn sounds continuously, transmission shifts to neutral and boom joystick (4) is
disabled.
• Upon returning to seated position, horn will cease and boom joystick is enabled.
Return transmission to neutral to allow system to reset prior to reengaging
forward or reverse travel.
31200743
Section 3 - Controls and Indicators
4
2
1
OAL3850
3-21