JLG G5-18A Operation Manual page 95

Hydraulic Quick Attach
This installation procedure is designed for one-person operation.
1. Tilt quick attach forward to provide clearance.
2. Align attachment pin with recess in attachment.
Raise boom slightly to engage attachment pin in
recess.
3. Check to be sure lock pin is disengaged. Tilt quick
attach back to engage attachment.
4. Press and hold switch (1) and button (2),
at the same time move the joystick right
to engage or left to disengage the quick
attach.
5. Raise boom to eye level and visually check
that the quick attach pin protrudes through
the hole. If the pin does not protrude
through the hole, place the attachment on
the ground and return to step 2.
6. If attachment is equipped, connect auxiliary hydraulic hoses. See "Hydraulic Operated
Attachment" on page 5-14.
31200743
Section 5 - Attachments and Hitches
1
OAL1472
ENGAGED
OAL2160
OAL2170
OAL2180
2
OAL1930
DISENGAGED
5-11