Sample Capacity Chart (Ansi & Ce) - JLG G5-18A Operation Manual

Section 5 - Attachments and Hitches
Sample Capacity Chart (ANSI & CE)
This Capacity Chart may be used with this model ONLY.
The telehandler model is indicated on the boom or chassis. Model
XXXX is used for demonstration purposes only.
Quick Attach Type
Blank = Standard
Quick Attach
UQC = Universal Quick
Attach
Boom Angle
Note: This is a sample capacity chart only! DO NOT use this chart, use the one located in your
operator cab.
TIP OVER HAZARD. All loads shown on rated capacity chart are based on machine
being on firm ground with frame level (see page 4-6); the forks being positioned
evenly on carriage; the load being centered on forks; proper size tires being properly
inflated; and the telehandler being in good operating condition.
5-6
XXXX
XXX
XX
XX
XX
50°
XX
XX 40°
XX
30°
XX
20°
XX
XX
10°
XX
0°
X
XX XX XX XX XX XX XX
XXXX XXXX
Load zones indicate the
maximum weight that may
be safely lifted.
WARNING
XX
+
= XXX XX MAX
70°
E
60°
D
C
B
A
XX
Load center must be
equal to or less than
value shown.
Attachment type,
weight and
dimensions must be
equal to or less than
the data shown.
1
Boom
Extension
Indicator
(arc)
OAL1771
31200743