Grapple Bucket - JLG G5-18A Operation Manual

Section 5 - Attachments and Hitches

Grapple Bucket

OZ1450
The joystick (1) controls lift/lower and the extend/retract movement of the boom.
The tilt button (2) enables bucket tilt.
• While pressing and holding button move joystick left to tilt up.
• While pressing and holding button move joystick right to tilt down.
To open/close grapple:
The auxiliary hydraulic button (3) enables open/close movement of the grapple.
• While depressing button move joystick right to close grapple.
• While depressing button move joystick left to open grapple.
Installation Procedure:
• Refer to "Attachment Installation" on page 5-9.
5-26
Use Grapple Bucket Capacity Chart
To determine maximum capacity, refer to "Telehandler/Attachment/
Fork Capacity" on page 5-4.
1
3
OAL1970
2
OAL1611
31200743