Bucket - JLG G5-18A Operation Manual

Section 5 - Attachments and Hitches

Bucket

OZ0730
The joystick (1) controls lift/lower and the extend/retract movement of the boom.
The tilt button (2) enables bucket tilt.
• While pressing and holding button move joystick left to tilt up.
• While pressing and holding button move joystick right to tilt down.
Installation Procedure:
• Refer to "Attachment Installation" on page 5-9.
Operation:
• Raise or lower boom to appropriate height for loading material from stockpile.
• Align telehandler with face of stockpile and drive slowly and smoothly into pile to load
bucket.
• Tilt bucket up far enough to retain load and back away from pile.
• Travel in accordance with requirements set forth in Section 1- General Safety Practices.
• Tilt bucket down to dump load.
5-24
Use Appropriate Bucket Capacity Chart
To determine maximum capacity, refer to "Telehandler/Attachment/
Fork Capacity" on page 5-4.
1
2
OAL1611
31200743