Park Brake - JLG G5-18A Operation Manual

Section 3 - Controls and Indicators

Park Brake

Park Brake Switch (G5-18A)
1
Park brake switch (1) controls the application and release of the park brake. Indicator light
on instrument panel illuminates to indicate brake is applied.
• Depress top of switch to engage park brake. With park brake applied, transmission will
not engage forward or reverse.
• Depress bottom of switch to disengage park brake.
MACHINE ROLL-AWAY HAZARD. Always move park brake switch to "ON" position,
lower boom to ground and stop engine before leaving cab.
CRUSH HAZARD. Turning engine off applies the park brake. Applying park brake or
turning engine off while traveling will cause unit to stop abruptly and could cause load
loss. To stop the machine in an emergency, either apply the park brake or turn off
engine.
3-4
WARNING
WARNING
OAL1382
31200743