Secure the system in the rack by tightening the 8 screws inserted in Step 3 and Step 4 with a
Step 5.
torque of 4.5±0.5 Nm.
2.5.4 Side by Side Mounting for SN2100 Rail Kit
Table 10 - Installation Kit
Kit OPN
MTEF-KIT-D
The following parts are included in the rail kit (see Figure 32):
• 1 metal frame for two systems (A)
38
Figure 31: Sliding the Blades in the Rails
A designated rail kit for the SN2100 systems can be purchased separately.
This section is relevant to short-depth systems that allow such form of installation
only.
At least two people are required to safely mount the system in the rack.
Rack installation kit for SN2100 series short depth 1U switches, allows instal-
lation of one or two switches side-by-side into standard depth racks
Mellanox Technologies
Rack Size and Rack Depth Range
Rev 1.9