Sun Oracle NETRA SPARC T4-1 Installation Manual page 98

6. Verify that the parameters were set correctly.
This example shows parameters that have been set to convert an SP from a DHCP
configuration to a static configuration.
-> show /SP/network -display properties
/SP/network
->
7. Commit the changes to the SP network parameters
You must perform this action for the new values to take effect.
-> set /SP/network commitpending=true
Set 'commitpending' to 'true'
8. (Optional) Verify that the parameters have been updated.
-> show /SP/network -display properties
/SP/network
->
9. Perform administrative tasks or service the Oracle's Netra SPARC T4-1 server as
needed.
Refer to the Servers Administration and Server Service.
90 Netra SPARC T4-1 Server Installation Guide • January 2013
Properties:
commitpending = (Cannot show property)
dhcp_server_ip = none
ipaddress = xxx.xxx.xxx.xxx
ipdiscovery = dhcp
ipgateway = xxx.xxx.xxx.xxx
ipnetmask = 255.255.255.0
macaddress = 00:21:28:6F:A7:BB
managementport = /SYS/MB/SP/NETMGMT
outofbandmacaddress = 00:21:28:6F:A7:BB
pendingipaddress = xxx.xxx.xxx.xxx
pendingipdiscovery = static
pendingipgateway = xxx.xxx.xxx.xxx
pendingipnetmask = 255.255.255.0
pendingmanagementport = /SYS/MB/SP/NETMGMT
sidebandmacaddress = 00:21:F8:6F:A7:BA
state = enabled
Properties:
:
: